Narrow your search
Modification Details
Translate Evilution
german french spanish italian greek finish danish polish japanese russian
Search Evilution
Most Viewed Pages
Most Rated Pages
Valance Removal
The valance is the black plastic shield that sits at the bottom of the rear panel.
Remove the rear panel by following this information.

Place a sheet down on the floor or take the panel inside to stop it getting scratched.

If you are changing the valance over and need to swap the heat shield then
use a Torx20 screwdriver, remove the ten screws from the heat shield.



Remove the six plastic pins by either pushing from the back or levering from the front.
An upholstery tool or tack remover can aid in the removal of these plastic pegs.



With all six pins pulled out and all six plastic insert removed, the valance can pull up and out.



Refitting is the reverse of above.


Click if Info Helpful

Buy me a drink

Contact us about mod

Print page

Translate

Back to top