452 Coupe Glass Removal
Remove the Roadsters coupe rear glass - to change the hinges or some other issue
Remove the drivers sided rear window 8 inside torx (and dont drop it).
Open the boot hatch up and unscrew the inner hinge bolt from both sides.
After removing the side you can unclip the rear windows heater wire and brake light wire.
Unfeed the cable and through the hole.
Remove the gas struts from the hatch end by following this guide.
Get help as you will put too much stress on the glass otherwise and it'll fall on your head.
Close the hatch carefully and unpop the hinge plastic covers.
Remove the torx bolts and the coupe glass will come away.
Fitting (in good old Hayne's tradition) is the reverse of removal, however do get help with this especially when refitting the gas struts and the alignment of the glass. The hinges are designed
to only fit on one side or the other so make sure you fix them back to the correct sides.