Narrow your search
Modification Details
Translate Evilution
german french spanish italian greek finish danish polish japanese russian
Search Evilution
Most Viewed Pages
Most Rated Pages
Roadster Front Panel Removal
How to remove the front panel set from the Roadster.
Firstly, unscrew the aerial from the offside wing.
Open the door and look at the top of the front wing, remove the screw with a Torx 25 driver.



Then the same with the bottom edge of the wing.



If you have Brabus side skirts, remove these first.
Remove the screw from underneath the back of the arch (circled green).
Look into the rear of the arch for the plastic rivets (circled red).
Push the centres of these rivets in to release them.



Open the bonnet and remove the screw circled, It can be a tricky one to get.



Follow the panel towards the front of the car and remove the screws circled.



Remove the light covers by removing the 2 screws circled in red.
Tip the light cover forwards, this can take some force due to the clips down the side.



Remove the 5 Torx screws holding the light base unit in place and move the lights to one side.



Remove the 4 Torx screws from the leading edge.



Look under the front edge of the car, there are 8 clips. 4 join the bumper
to the under tray and 2 on each side just in front of each wheel..



Pull the wings away from the car, reach behind and disconnect the side repeaters.



Pull the panels forward and disconnect the front indicators, side lights and fog lights.
Get a helper to take the other side and pull the panels towards the front of the car to remove them.



Job done.


Click if Info Helpful

Buy me a drink

Contact us about mod

Print page

Translate

Back to top