Roadster Bonnet Removal
Remove the bonnet so you can get the scuttle panel off to waterproof the wiper bucket or change the wiper motor
Mod Credit: evilution
Return to Evilution Website
Pop out the covers on each side.
Remove the 2 Torx bolts.
You may find clearance a bit easier if you remove the Torx screws from the wings.
This allows you a bit of space to get the bonnet hinges out of the scuttle panel.
Ideally you should have 2 people but it can be done on your own if you have no friends.
By printing this document I state I have read and understood this