Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsdont search for 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsdont search for forfour mods

Exterior guides and mods

450 Valance Removal

The valance is the black plastic shield that sits at the bottom of the rear panel.

Modification Details

Remove the rear panel by following this information.

Place a sheet down on the floor or take the panel inside to stop it getting scratched.

If you are changing the valance over and need to swap the heat shield then
use a Torx20 screwdriver, remove the ten screws from the heat shield.

Remove the six plastic pins by either pushing from the back or levering from the front.
An upholstery tool or tack remover can aid in the removal of these plastic pegs.

With all six pins pulled out and all six plastic insert removed, the valance can pull up and out.

Refitting is the reverse of above.

Click if Info Helpful

Contact us about mod
Terms and Conditions
Site Disclaimer

© Copyright 2019, all rights reserved.