Mod Filter

Smartmods

smartmods
for all your modding needs, recommended by Evilution

Coolant Vacuum Filling

Mod Description
How to fill your drained engine with coolant with no air locks
Mod Details
PremiumYes Difficulty Mod ID1074 Creditevilution For450 Fortwo451 Fortwo452 Roadster453 Fortwo/Forfour454 Forfour Linkhttps://www.evilution.co.uk/mod/coolant-vacuum-filling.htm Copy to Clipboard

Vacuum Filling

Vacuum filling the coolant into an engine is a trick adopted by many car manufacturers. It allows coolant to be drawn into the system with no air locks so the engine doesn’t require bleeding.

This saves time, effort and spilt coolant.

Instead of pushing coolant in under pressure or pouring the coolant in and using gravity to fill the system from the bottom upwards, vacuum filling pulls all of the air from the coolant system leaving little to no air to create an air lock. The vacuum in the system pulls the coolant in and evenly distributes around the entire system.

Air Locks

Bleeding the air locks out of the petrol 450 and Roadster is an easy one. The petrol 451 is a bit more of a pain but but can be done with simple tools. The same can’t be said for the diesel engine in the 450 and 451. It is possible but it’s a bit of a mess about. The 451 ED must be vacuum filled too.

Expensive Equipment

If you buy a vacuum filling unit and the air compressor required to power it, you are looking in excess of £150. This is far too expensive for something that you may not regularly use. So I decided to make my own. Even if you have to buy everything, it’s not going to be much more than £50. However, many people will have the most expensive part.

Make Your Own

Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.