Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsdont search for 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsinclude forfour mods

451 Fortwo Rear Bearings

Modification Details




Loosen the wheel bolts, jack the car up and remove the wheel.



Use a Torx30 to remove the drum fixing.



Release the handbrake and pull the drum from the hub. With the car in reverse the driveshafts are locked.
Use a 21mm socket to remove the centre bolt.

Remove the wheels and remove the bolt from the centre of the hub using a standard 16mm socket.



If you look in the hole, you will see the end of the driveshaft.



Push it in...



...and it should pop out of the bearing.

Attention

The rest of the information held in this guide is locked to members of Evilution only, you can login below or click this link to find out more.

Enter your login credentials here

Email:
Password:



Click if Info Helpful

Contact us about mod
Cookies
Terms and Conditions
Site Disclaimer

© Copyright 2013, all rights reserved.