Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsdont search for 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsinclude forfour mods

Chassis guides and mods

451 Brake Master Cylinder

Modification Details




Depending on what you want to do, you can remove just the master cylinder, the master cylinder with the vacuum brake booster or the entire brake pedal assembly.

Firstly, drain the brake fluid from the system. You will need MB Star Diagnostics to refill the system later.

Entire Pedal Assembly

Pull up the "ribbed for her pleasure" rubber johnny from the base of the brake pedal.
Remove the Torx45 bolts from the brake pedal arm.



Lift the brake pedal up...



...and fold it towards you about 45 degrees.



Pull the brake pedal sideways to disconnect it from the base.



Raise the car up as high as you can, secure it and lower the front undertray.
Remove the 2x E10 bolts from either side of the casting (arrowed below).



Now you need to undo the 2 metal pipes coming from the master cylinder. These are nearly impossible to photograph on the car. You have to work on the 2x 12mm pipe nuts that you just can't see as they are sort of on the top of the master cylinder. You'll have to remove these by feel.

Attention

The rest of the information held in this guide is locked to members of Evilution only, you can login below or click this link to find out more.

Enter your login credentials here

Email:
Password:



Click if Info Helpful

Contact us about mod
Cookies
Terms and Conditions
Site Disclaimer

© Copyright 2019, all rights reserved.