Mod Filter

Smartmods

smartmods
for all your modding needs, recommended by Evilution

450 Key Fob Battery

Mod Description
Batteries don't last forever so instead of getting locked out of your car, let's change the battery for a fresh one.
Mod Details
PremiumNo Difficulty Mod ID536 CreditEvilution Cost££2+ For450 Fortwo Linkhttps://www.evilution.co.uk/mod/450-key-fob-battery.htm Copy to Clipboard

How Do I Know It Needs Changing?

When the battery gets low, the indicators will flash nine times in quick sucession when you lock or unlock the car. From this point onward, you have approximately 100 uses of the remote central locking fob before it won’t open the car any more.

Ideally the battery should be changed on every service but they can usually last 2 years.

What Battery Do I Need?

Early Fortwo 600cc (1 button key) = 2x CR2016
Fortwo 450 600cc = CR1225
Fortwo 450 700cc = CR1225
Fortwo 450 Diesel = CR1225

Fortwo 450 with Infrared = 2x CR1225

Infrared keys were fitted to Japanese smarts due to their RF restrictions. However, they seem to be appearing all around the world.

The Ideal Key Battery?

The best are the Renata batteries because they are factory fitted batteries for Swatch watches and also factory fitted in most smart keyfobs as standard.

They are Swiss made cells that cost less and last longer than other imported and no name batteries.

Fitting The Battery

Fortwo 450 Early One Button Keyfob

Insert a thin screwdriver into the hole in the back to release the catch, pull the cover off.

Lever the two halves apart to reveal the PCB.

Lift the PCB up to reveal the batteries. This is the only style of smart key fob that uses two batteries.

They are stacked on top of each other with the + side down. Pull them from the clips and replace both.

Fortwo 450 Three Button Keyfob

Here is the key and the new battery, remove the key from any keyrings. To say you have piles in English is unfortunate, in French, it means you have batteries.

Place a flat blade screwdriver into the back of the key and separate the two parts.

Place the screwdriver into the cutout (circled red) and lever the PCB out of the key.

This is what you will be left with, you can now access the battery.

Pry the old battery out. It is important to have your battery ready.

On one side is a pair of sprung tabs, you need to push the battery against the tabs and push down at the back to seat it correctly. Do this within 2 minutes of removing the old one.

Reassemble the key and dispose of the battery safely.

That’s it for another year.