Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsinclude 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsdont search for forfour mods

453 Rear Bumper Removal

Modification Details




Before starting, you have to remove the lower boot flap.



Remove the 5x Torx30 bolts found along the top edge of the bumper.



Below the reflectors are a single Torx20 screw to remove.



Underneath the edge of the lower valance is another Torx20 screw on each side to remove.



Using the Torx20 again, look in the rear arch...



...and remove the screw from both sides of the car.



You can now pull the bumper sideways to unclip it from the car. Clips can break but they aren't important.



If you have rear parking sensors, you'll have an electrical connector on the left. Disconnect it.



Then the bumper is loose and can be removed from the car.


Click if Info Helpful

Contact us about mod
Cookies
Terms and Conditions
Site Disclaimer

© Copyright 2013, all rights reserved.