Mod Filter

Smartmods

smartmods
for all your modding needs, recommended by Evilution

High Level Brake Light

Mod Description
Changing the bulbs in the high level brake light assembly.
Mod Details
PremiumNo Difficulty Mod ID354 CreditEvilution Cost£ï¿½2 For450 Fortwo451 Fortwo452 Roadster Linkhttps://www.evilution.co.uk/mod/high-level-brake-light.htm Copy to Clipboard

Fortwo 450 And Roadster 452

For some reason, many places will tell you that the bulbs in the high level brake light cannot be removed. It could be that they have had problems getting the bulbs out.

Needless to say, you can get the bulbs out and I have a nice easy way to do it. The five bulbs are 284 bulbs, they are a mini wedge fit bulb like the 501.

450/452 – Removing The Reflector And Diffuser

Undo the 2 posi head screws and pull the diffuser out of the spoiler.

Underneath you will find the reflector, warning it is sharp. The reflector may come out in the diffuser or may stay attached to the car. If it ist attached to the car, you just need to pull it to free the connections.

451 – Removing The Reflector And Diffuser

Undo the 2x Torx10 head screws and pull the diffuser out of the spoiler.

Underneath you will find the reflector, warning it is sharp. The reflector may come out in the diffuser or may stay attached to the car. If it ist attached to the car, you just need to pull it to free the connections.

Changing The Bulbs

Take a piece of sellotape and wrap it around the bulb that is faulty and needs removing, let the tape stick to itself and the bulb.

Pull the sellotape and the bulb will pop out.

You can also push the bulbs out from the back using a cocktail stick or narrow screwdriver. (Thanks Alastair).
Also, if you have some silicone hose that’s small enough, you can push it over the bulb pull it out.

The bulbs currently in it are 284 bulbs which are available from most motor spares shops. Being a bulb they will work either way around unlike an LED so just push them in.

Refit the reflector and diffuser and test.