Narrow your search
Modification Details
Search Evilution
Most Viewed Pages
Most Rated Pages
Seat Removal
Swapping your seats over or running some cables?
Important

If you have side airbags it is recommended that you disconnect the battery and leave for 5 minutes before you attempt to unplug the yellow airbag connectors under the seat.
Remember to plug it back in and secure the wires before reconnecting the battery.

If you have heated seats, ensure that the ignition is off when you unplug the black heated seat plugs from under each seat. Reconnect before turning the ignition on.

Removing the seats

Using a 17mm socket, undo the belt support bolt on the door side of the chair.



Slip the seat belt out of the retainer.



Slide the seat forward and using a Torx 45 bit, remove the bolts at the back.



Both sides.



Slide the seat back and using the same Torx bit remove the front bolts.



Both sides.



With those removed you can now lift the seat free from the car.

Refitting is the reverse of above, remember to reconnect any wires under the seats.

Seat Airbag Wiring Information

Thanks to Iain Moone for the info

The seat airbag connections can be plugged in either way around so check your wiring.

Drivers Seat:
Violet/White to Brown
Violet/Green Blue

Passenger Seat:
Violet/Yellow to Brown
Violet/Grey to Blue


Info helpful

Info not helpful

Contact us about mod

Print page

Back to top