Mod Filter

Smartmods

smartmods
for all your modding needs, recommended by Evilution

Brabus V6 Steering Wheel Fitting

Mod Description
Fitting the Brabus V6 Raid steering wheel using the safe method
Mod Details
PremiumYes Difficulty Mod ID754 Creditevilution For450 Fortwo452 Roadster Linkhttps://www.evilution.co.uk/mod/brabus-v6-steering-wheel-fitting.htm Copy to Clipboard

This is the optional steering wheel that was an option after it appeared on the Roadster V6 prototype. It is an Atiwe/Raid Daytona steering wheel.

These days, they are nearly impossible to find so therefore, if you do find one, it’ll be incredibly expensive. However, it’s not the steering wheel that’s the incredibly expensive part, it’s the adapter hub that bolts to it and allows it to connect to the steering column. You can find the wheels on eBay but they won’t fit without the smart adapter.

This guide will show you how to fit part number Q0017552V001000000. Fitting of Q0021663V001000000 (same wheel WITHOUT paddles) is similar.

Fitting

If you are fitting a 2nd hand Brabus V6 using the safe swap method then you may want to see specifics about fitting this particular type of wheel. Firstly, dismantle the V6 wheel as shown here. Remove the Raid steering wheel boss by removing the 4x 6mm Allen head socket bolts. Disconnect the 2 wiring looms and pull them through the wheel.


Attention

The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.