Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsdont search for 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsdont search for forfour mods

Engine guides and mods

Roadster Alternator Change

Modification Details




Get The Right Alternator

When I initially fitted a replacement alternator to my Roadster it didn't actually work. I thought I
had misdiagnosed the fault but actually I had been sold the wrong alternator for my car. On the smart
there seems to be 6 different alternators but although they all fit, they won't all work.

The big problem now is that Smart are no longer selling the alternator for the Roadster.
People seem to having good luck with the Denso DAN521. (confirmed by Karl S M).

What If I Ignore You?

From the number of emails I get from people who have ignored the primary rule, there is a very good chance
you'll be sold the wrong one for your car. For most car parts retailers, there is 1 alternator for every smart.
So, if you do get the wrong one, you'll waste time and money and you might even damage your car.

What Faults Can Occur?

It can be something simple like the battery not charging all the way through to the car not starting,
the engine not running correctly, engine check light on, numerous stored fault codes, the car not
revving and even the electrical destruction of the ECU.

How Do I Know The Alternator Isn't Working?


With a cheap multimeter (that you really should own as it's an essential piece of kit)
you can test the alternator from the battery as seen on this page.


Method 1


This is an update to the existing page. The old method that was found here and on similar sites
just wasn't/aren't well thought out. After having a little alternator crisis with my Roadster which
resulted in having to remove and refit the alternator 3 times, I worked out a better way.

Jack the car upremove the rear wheels, disconnect the battery and remove the arch liners on
both sides. Remove the 3 plastic nuts with a 10mm hexagon socket and pull the arch liner out.
  


Protecting the belts is a plastic cover. Pull out the front plug...


Attention

The rest of the information held in this guide is locked to members of Evilution only, you can login below or click this link to find out more.

Enter your login credentials here

Email:
Password:



Click if Info Helpful

Contact us about mod
Cookies
Terms and Conditions
Site Disclaimer

© Copyright 2013, all rights reserved.