Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsdont search for 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsdont search for forfour mods

Wiring & Pinouts guides and mods

453 Bulkhead Wiring

Modification Details




So, you want to run a cable either from inside the car to the outside or from the outside to the inside.

The main wiring harness goes through the bulkhead near the middle. There's no good access on either side.
So we need to look for an alternative. Thankfully there are 2 that are perfect for both LHD and RHD users.

I have removed the bonnet panel but I have also removed the headlight. You don't have to do that.
My headlights were out at the time but it made it easier to take photos.

Passenger Side For RHD

Look at the top of the suspension strut. Now look up a bit...



...and you'll see a black plastic grommet.


Attention

The rest of the information held in this guide is locked to members of Evilution only, you can login below or click this link to find out more.

Enter your login credentials here

Email:
Password:



Click if Info Helpful

Contact us about mod
Cookies
Terms and Conditions
Site Disclaimer

© Copyright 2019, all rights reserved.