Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsdont search for 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsdont search for forfour mods

Accelerator Pedal

Moritz G dismantled the accelerator pedal and measured the resistances should you need to double check yours.

Modification Details




The smart accelerator (gas) pedal is a "fly by wire" design, this means that it controls the
throttle body electronically and not through the use of a bowden cable like older cars. It measures
the position of the pedal comparing resistances over 2 pairs of tracks.



The readings that he got were as follows.

These are the 2 set resistances for the central tracks:
Pad 1 to pad 5 = 1.22K Ohm
Pad 2 to pad 4 = 1.23K Ohm

These are the measurements for pedal when not pressed:
Pad 1 to pad 6 = 825 Ohm
Pad 2 to pad 3 = 800 Ohm

These are the measurements for pedal when fully pressed:
Pad 1 to pad 6 = 1.54K Ohm
Pad 2 to pad 3 = 1.51K Ohm


Click if Info Helpful

Contact us about mod
Cookies
Terms and Conditions
Site Disclaimer

© Copyright 2013, all rights reserved.