Mod Filter


for all your modding needs, recommended by Evilution

453 Centre Console Remove

Mod Details
PremiumYes Difficulty Mod ID1814 Creditevilution For453 EQ453 Fortwo/Forfour Link Copy to Clipboard


Lift the gear lever surround up.

Push the PRND display upwards, turn it 45 degrees and post it back through the hole.

Disconnect the switch electrical connector. Put the car into D (drive). This brings the gear lever back far enough so you can lift the surround up and over the knob.


Unclip the gaiter surround from the base…

…and lift it up like Marilyn Monroe skirt style.

Grab the rubber O ring…

…and pull it down.

Lift the surround up…

…and post the gaiter surround through the hole.

Pre-Facelift Centre Console

Remove the 4x Torx20 screws and pull the drawer out of the side.

Pull off the decorative side trims…

…and then pull off the side panels. They are just clipped in.

Look at the front of the base and remove the 2x Torx20 screws.

Then look behind the drawer runners, there’s 1 screw on the right and sometimes there’s one on the left side.

Now go to the back of the hand brake. Look in the cup holder and remove the Torx20 screw.
If you have an arm rest, Click here for removal.

Lift the cover up…

Reach in behind and disconnect any electrical connectors and fully remove the cup holder.


The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.