Mod Filter


for all your modding needs, recommended by Evilution

Cruise Control Wiring – Roadster

Mod Details
PremiumYes Difficulty Mod ID1764 Creditevilution For452 Roadster Link Copy to Clipboard

Fitting The Cruise Control Stalk

Firstly you need to get a cruise control stalk from smart.
Roadster stalk number 001 2540 V004 C96A 00.

Look under the steering wheel cowl, you will see 4 holes. Remove the Torx10 screws.

Split the upper and lower cowls and lift the speedo. The surround that sits behind it will pop up. Remove the surround. Lift the speedo and disconnect the wiring connection by pressing the back and swinging the locking arm over to unclip it. Never pull the connector by the wires.


This is what you will find.


The rest of the information held in this guide is locked to Supporter 6, Supporter 12, Supporter 12+, and Business members of Evilution only.

Use the buttons below to login or find out about becoming a premium member.