Mod Filter


for all your modding needs, recommended by Evilution

451 Scuttle Panel Removal

Mod Description
Gain access to the cabin air inlet and the window squirting nozzle hosing
Mod Details
PremiumNo Difficulty Mod ID205 CreditEvilution For451 Fortwo Link Copy to Clipboard

Remove the front panel as seen here. During the panel removal you will remove the Torx25 bolt as seen below. This is one of the fixings holding the scuttle in place.

Remove the 2x Torx25 screws from the centre of the scuttle.

Either side of the front are another 4x Torx25 screws.

Removing the windscreen wipers is the easiest option if you have the tools. The nuts are 13mm but are awkward to get to. If you can’t get the wipers off you can still remove the scuttle by pulling to unclip the separate section over each wiper spindle.

The panel is now loose. Turn it over and pull the rubber tube from the back of the widow washer jet.

The scuttle panel is now free from the car. The picture below shows the car with the scuttle off, the cabin air intake is highlighted in green.

Refitting is the reverse of removal.