Narrow your search
Modification Details
Translate Evilution
german french spanish italian greek finish danish polish japanese russian
Search Evilution
Most Viewed Pages
Most Rated Pages
450 Rear Panel Removal
Guide to assist you in removing the rear panels
Yes it's dirty, let's get the rear panel off.

Using a Torx 25 bit, undo the bolts located either side in front of the rear wheel arch.



Using the same Torx bit, undo the three bolts along the back. Remember
anticlockwise will undo a bolt and clockwise tightens the bolt back up.



If you have a standard valance, look underneath at each and and remove the two bolts.



As mine has a custom exhaust and valance, the bolts are different to standard.
The fixings will differ depending on the valance, remove them both with the correct tool.



Pull the wheel arches backwards to unclip them from the plastic
pegs in the bodywork and lift the bumper off, this is what you will find.



If you have to replace a single rear section you can disassemble it simply by removing
the yellow clips by levering them off with a screwdriver and separating them.



Click if Info Helpful

Buy me a drink

Contact us about mod

Print page

Translate

Back to top