Roadster Speedo Removal
Remove the Roadster speedo to change the LEDs or the dial face
Look under the steering wheel cowl, you will see 4 holes. Remove the Torx10 screws.
Split the upper and lower cowls and lift the speedo. The surround that sits behind it will pop up.
Remove the surround. Lift the speedo and disconnect the wiring connection by pressing the
back and swinging the locking arm over to unclip it. Never pull the connector by the wires.
Take the speedo and base from the car and flip it over to reveal the underside.
Remove the 2 Torx10 screws and the speedo will be free from the base.