Select cars to narrow search
dont search for 599cc fortwo modsdont search for 698cc fortwo modsdont search for 999cc fortwo modsdont search for roadster modsdont search for 453 smart modsdont search for forfour mods

451 Bonnet Opening

The new smart has an easily removable front panel making the access to the light bulbs and fluids much easier.

Modification Details




Evilution HD Video


Opening The Bonnet

Go to the front of the car and look at the grill, you will see a tab at each end.

Push the outside of the tab into the car...



...and the clip will spin open. Repeat on the other side.



Lift the front edge up about 8 inches and pull the panel forwards to remove it.



On the inside of the bonnet panel are two thick plastic prongs that seat into square holes
located just above the grill on each side. This holds the panel in place as you work.



Important

Don't allow the panel to just swing from the strap, it is there to stop it
flying from the car in a crash and not for support. Allowing the panel to
swing could damage the panel it rubs against.

Click if Info Helpful

Contact us about mod
Cookies
Terms and Conditions
Site Disclaimer

© Copyright 2013, all rights reserved.