Narrow your search
Modification Details
Translate Evilution
german french spanish italian greek finish danish polish japanese russian
Search Evilution
Most Viewed Pages
Most Rated Pages
Brabus 450 Side Spats
The first thing to know is these are disgracefully expensive. You could spend over £200 for 4.
They are available from most smart dealers, I haven't seen any cheap copies yet.

Front Spats

These are very easy, push them in place and butt them up to the wheel arch.



On the inside you will see a hole. You are supposed to drill a 2.5mm hole and fix in place with a short screw but I found that self tapping screws required no holes pre drilling (as you'd expect).



Underneath are 2 more such holes, again screw them in place with short screws.
You will notice there is a tab that fits into an indent to help you position it properly.



Fit the other side using the same procedure.

Rear Spats

Remove the rear arch bolt with a Torx25 screwdriver and pull the arch away slightly.



On the end of the rear spats is a hole, slot this hole behind the arch and refit the Torx25 bolt.



Underneath are 2 holes, You are supposed to drill a 2.5mm hole and fix in place with a short screw but I found that self tapping screws required no holes pre drilling (as you'd expect).
You will notice there is a tab that fits into an indent to help you position it properly.



Fit the other side with the same procedure. Stand back and appreciate the great look.
Then cringe at the thought of how hard it will be to clean your car properly. Nightmare.


Click if Info Helpful

Buy me a drink

Contact us about mod

Print page

Translate

Back to top