Mod Filter

Smartmods

smartmods
for all your modding needs, recommended by Evilution

News

Normal Mod DVR Fitting & Setup450 Fortwo451 Fortwo452 Roadster453 Fortwo/Forfour454 Forfour

Having a DVR recording your driving is a good idea and gives you evidence in case of an accident.
However, unless you fit it properly, it might not be as helpful as you think.

Normal Mod Sound Deadening450 Fortwo451 Fortwo452 Roadster454 Forfour

The smart is only a small car and most of the engines are only 3 cylinder so they can be quite noisy

Premium Mod 453 Fog Light Switch453 Fortwo/Forfour

Adding fog lights to the 453 is a 3 part situation. You have to: 1 - Fit the fog lights and the wiring loom. 2 - Code the fog light ability. 3 - Fit the replacement stalk. Step 3 - Fit The Replacement Stalk Most people immediately assume that the fog light switch...

Normal Mod 453 Rear Bumper Removal453 EQ453 Fortwo/Forfour

Fortwo Before starting, you have to remove the lower boot flap. Remove the 5x Torx30 bolts found along the top edge of the bumper. Below the reflectors are a single Torx20 screw to remove. Underneath the edge of the lower valance is another Torx20 screw on each side...

Premium Mod 453 Door Panel Removal453 Fortwo/Forfour

Important This only applies to the 453 fortwo. The 453 forfour has metal door panels that cannot be removed. Remove the front bumper and the arch panels. Remove the front arch support clip. This is held in place with a 10mm bolt with a Torx30 head. Either tool will...

Normal Mod Forge Intercooler Pipes450 Fortwo452 Roadster

These silicone pipes replace the rigid plastic pipes to and from the intercooler. They have a wide bore and smoother internal walls which allow a better flow of air.

Normal Mod Forge TIK Pipe450 Fortwo452 Roadster

A new Silicone TIK pipe from Forge Motorsport, lets have a close look at this new upgrade, fitted to OTVs For2.

Normal Mod X-Gauge450 Fortwo452 Roadster

The X-Gauge is a digital gauge capable of displaying up to 7 parameters from the ECU onto a screen that fits into the standard clock pod.