Mod Filter

Smartmods

smartmods
for all your modding needs, recommended by Evilution

News

Premium Mod Petrol 450 Engine Mounts450 Fortwo

This is how to change the 3 engine mounts on the petrol 450 fortwo (600cc and 700cc). Side Engine Mounts Remove the bolts from the X-frame on either side and remove it from the car. You can just undo the top bolts and pull the x frame down to get some clearance...

Premium Mod 450 Alternator Change450 Fortwo452 Roadster

The alternator is fairly robust but its open position means it is prone to seizing up. Let's sort it out.

Premium Mod 451 Fortwo Coolant Leak451 Fortwo

If your car suddenly overheated and you seem to have a waterfall somewhere behind the engine, there's a good chance you have a split coolant pipe.

Normal Mod Larger Throttle Body450 Fortwo452 Roadster

The original throttle body has a fairly small opening, bigger is better. For the smart 450 and Roadster ONLY. NOT 451.

Premium Mod 451 Coolant Drain451 Fortwo

Draining Unless you like to be scalded, wait until the car is cold. Remove the front service panel and undo the cap to the coolant header tank. Look under the car at the engine over to the right. Just behind the long drive shaft, partially hidden by some...

Premium Mod Crankshaft Rotation Sensor450 Fortwo452 Roadster

The crankshaft is what the pistons are attached to. The crankshaft sensor measures the rotation of the crankshaft (and therefore the position of the pistons) so the ECU knows when to inject petrol and to fire the spark plug.

Premium Mod 45bhp CDI EGR Clean451 Fortwo

Diesels are dirty engines, they are noisy but they are efficient. However, if they can't breathe then you aren't getting the best from the engine.

Premium Mod 451 Engine Mount Change451 Fortwo

The 451 engine mount suffers badly from wear which allows too much engine movement, swapping it is very easy.

Normal Mod 451 CDI AC Belt Change451 Fortwo

Changing the air conditioning belt on the diesel isn't the same as the petrol model, they didn't put a pretensioner on that belt for you to loosen to enable the belt to just pull off. However, the alternative is actually easier and doesn't require you to retention the belt correctly afterwards.